Grizzly G0813 Owner's Manual page 42

H7653—6" Spiral Cutterhead
This cutterhead replaces the standard straight
knife cutterheads on our Grizzly jointers . Has four
spirals with indexable, four-sided carbide inserts,
so each insert can be rotated for a new factory
sharp edge. Cutterhead includes cast iron pulleys,
bearing blocks, mounting studs, 5 extra inserts,
T-handle wrench, Torx bits and spare insert
screws. Has an incredible finish, and is compa-
rable to Byrd cutterheads in quality of cut as well
as the quality of the cutterhead itself.
Figure 57. H7653 Spiral Cutterhead.
G6697—6" x 1" x ⁄ " HSS Jointer Knives,
1
8
Set of 3
These jointer knives are made from M-2 high
speed steel and are hardened to 62–64 Rockwell
and tempered in a salt bath. All sets are balanced
to within one gram.
Figure 58. G6697 Replacement Knives for
G0813/G0814.
-40-
H7764—8" Byrd Shelix Cutterhead
®
Made in the USA by Byrd, this indexable carbide
insert cutterhead is the best money can buy—
period! The inserts are not only placed in a spiral
pattern, they are also positioned at an angle so
the shearing action leaves a glassy smooth cut
on the toughest and most figured woods. Comes
with all 30 inserts on the cutterhead, plus 5 extras.
Great upgrade!
Figure 59. H7764 Byrd Shelix Cutterhead.
G1163P—1 HP Dust Collector
Effective dust collection not only keeps your shop
cleaner and more pleasant to work in, but it can
also protect your health by reducing your overall
exposure to dust. The small size and low profile
make this a perfect point-of-use, dedicated dust
collector. When it's not possible to plumb your
shop with a full dust collection system, put one of
these next to every machine instead!
Figure 60. G1163P 1 HP dust collector.
Model G0813/G0814 (Mfd. Since 3/16)