(28) Height of the slider and pasting of the presser plate sheet (Pneumatic type only)
1. Follow the dimensions in the drawing below for pasting the presser plate sheet
Apply grease after pasting the sheet.
2. Bring the upper end of the slider
Grease application
1510, 2210
Grease application
Standard Adjustment
into close contact with the presser plate
1306
Visually check the clearance
to see if it is uniform on the
right and left.
Visually check the clearance
to see if it is uniform on the
right and left.
Presser height
adjusting screw
Rear side of the
sewing machine
Rear side of the
sewing machine
– 47 –
on the presser plate
.
Visually check the clearance
to see if it is uniform on the
right and left.
Visually check the clearance
to see if it is uniform on the
right and left.
.