Drawing Of The Table - JUKI AMS-210EN Series Engineer's Manual

15. Drawing of the table

2 x 2 from the rear side, drill depth 20
4 x 2 from the rear side, drill depth 10
(Leg mounting hole)
Draw stopper mounting position
(1 position on rear side)
4 x 8 drill
2 x 2 drill, depth 14
30 drill, 51 depth Counterbore
depth 16
9 drill, 20 depth Counterbore
depth 17
17 drill
– 235–
Top of
table
(2pcs.)
17 drill
PART No. : 40030949