Maintenance; Grease Lock-Tight Application Points - JUKI AMS-210EN Series Engineer's Manual

4. Maintenance

(1) Parts to which grease • lock-tight is applied
In the case of disassembling a section where grease is applied or sealed in, or if the operating frequency is much
more than ordinary usage, grease shall be supplemented at least once every two years. In the case of disassembling
a section where grease lock-tight is applied, this grease lock-tight shall be applied before reassembly.
NEEDLE BAR THREAD TAKE-UP LEVER SYSTEMS
A (Both end planes)
A
WIPER SYSTEMS
A
A
A
A (Both end planes)
A
A : JUKI Grease A
10g tube JUKI Part No. : 40006323
100g tube JUKI Part No. : 23640204
∗
– 240 –
∗
: Lock-tight 241