Turning The Power On; Turning The Power On And Off - Pentax R-315EX(NX) Instruction Manual

4. TURNING THE POWER ON

4.1 Turning the power on and off

Pressing the [POWER] key shows the initialscreen.
(The [POWER] key is also used to turn the power off.)
After a few seconds, it turns to Electronic vial
screen. Move the vials to center by adjusting
the leveling screws.
Pressing the [ENT] key views the angle and
distance measurement screen.
• The Auto Power Off function will automatically turn the power off if no operations are
performed for approximately 10 minutes. (Factory default setting)
• The [POWER] key is controlled by software in the instrument while it is working, and
this key is valid only when turning off causes no problem.
• The value displayed when the power was last time turned off will be displayed for the
horizontal angle. If this horizontal angle is not needed, please perform horizontal
angle 0 SET.
For details on resetting the horizontal angle 0
For details on changing the horizontal angle from clockwise to
counterclockwise
For details on measuring the vertical angle
For details on distance measurement
For details on the automatic power-off function
For details on the Electronic vial
32
ELECTRONIC VIAL
LD POINT PLUM ADJ
MODE A 15°C
85° 39' 40"
H.angle
H.dst.
V.dst.
MEAS TARGET 0 SET DISP MODE
See "8.9 12"
See "10.1"
T.COMP.
ON
30"/1DIV
SENS.
S 0
See "5.2"
See "5.6"
See "5.5"
See "6 "