1.2 Unpacking and packing
[Unpacking the Instrument from the case]
Set the case down gently with the lid facing upwards.
1
Open the latches while pressing down on the lock (safety mechanism) and open the
2
lid of the case.
Remove the instrument from the case.
3
[Packing the instrument in the case]
Make sure the telescope is fairly level and lightly tighten the telescope clamp screw.
1
Line up the housing marks (round yellow marks on the instrument) and tighten the
2
upper and lower clamp screws.
With the housing marks facing upward, set the instrument gently in the case without
3
forcing it.
Close the lid to the case and secure the latches.
4
1.3 Standard equipment
Instrument
1
Carrying case
2
BP02 battery
3
BC03/AC01 charger
4
Plumb bob
5
Hexagonal wrench
6
Rain cover
7
Quick Reference Guide (Basic, PTL procedures)
8
CD-R (Basic operation & Special Functions manual)
9
14