Stun Server Port; Static Napt Settings; Global Ip Address - Panasonic KX-UT670 Administrator's Manual

STUN Server Port

Description
Value Range
Default Value
Configuration File Reference

4.4.5 Static NAPT Settings

This screen allows you to configure the NAPT (Network Address Port Translation) settings. If the unit is
connected behind a router that uses NAT/NAPT to translate between private and global IP addresses, VoIP
packets might be blocked by the router, depending on the SIP server. To avoid this problem, this setting is
required. For details, see 1.1.4.2 NAT (Network Address Translation) Setup.

4.4.5.1 Global IP Address

Global IP Address
Description
Document Version 2011-11
Specifies the port number of the STUN server.
1–65535
3478
STUN_SERV_PORT (Page 139)
Specifies the global IP address of your network.
Note
•
You must enter a value in this field if at least 1 of [Line 1]–
[Line 6] is set to [Yes], or when port numbers are specified in
[Channel 1–25].
•
The global IP address will reflect SIP messages and RTP
packets.
Section 4 Web User Interface Programming
Administrator Guide 65