Section 9 Troubleshooting
Password for Web User Interface Programming
Problem
I have lost the login password of the Web
user interface for the Administrator or User
account.
Time
Problem
The time is not correct.
208
Administrator Guide
•
Reset the password from the unit. The passwords for both
Administrator and User will be reset (® see 3.1.1 Reset
Web ID/Password).
For security reasons, it is recommended that the
passwords are set again immediately (® see
4.5.2 Administrator Password or 4.5.3 Change User
Password).
•
Adjust the date and time of the unit. For details about the
operations, refer to the Operating Instructions on the
Panasonic Web site (® see Introduction).
•
Automatic time adjustment can be enabled by configuring
the NTP synchronization and time zone settings in the
unit's [Settings] menu. For details, refer to the Operating
Instructions on the Panasonic Web site (® see
Introduction).
•
If the time is still incorrect even after setting NTP
synchronization, check the firewall and port forwarding
settings on the router (® see 1.1.4 Other Network
Settings).
Cause/Solution
Cause/Solution
Document Version 2011-11