Table of Contents
Advertisement
INSTALLATION
2.6 INSTALLING PORT EXPANSION CARDS:
KX-TVS102 OR KX-TVS204
2.6.1 General
Port Expansion Cards
• The KX-TVS102 card can be installed in the KX-TVS110, KX-TVS200, and KX-
TVS300. One KX-TVS102 card can support 2 VPS ports, under either Inband or DPT
Integration.
• The KX-TVS204 card can be installed in the KX-TVS200 and KX-TVS300 (the KX-
TVS110 can only accept the KX-TVS102 card). One KX-TVS204 card can support 4
VPS ports, under DPT Integration.
Expansion Capabilities of the VPS
• The KX-TVS110 can handle up to 4 ports simultaneously when 2 KX-TVS102 port
cards are installed.
• The KX-TVS200 can handle up to 12 ports simultaneously when 3 KX-TVS204 port
cards are installed.
• The KX-TVS300 can handle up to 24 ports simultaneously when 6 KX-TVS204 port
cards are installed.
The KX-TVS110 has one port expansion card (KX-TVS102) installed prior to factory
shipment.
The KX-TVS200 and KX-TVS300 have no port expansion card installed at the factory—the
cards must be purchased separately.
CAUTION
Before installing an optional port card, it is very important that the power to the unit be
turned off. Before beginning the actual installation and touching the card or any circuitry
within the unit, discharge any static electricity from your body by touching the grounding
strap. This is a critical step that must be performed to protect the printed circuit board and
any other electronic components from static electricity. Refer to the manual accompanying
the optional card concerning the precautions that must be taken and the steps for completing
the installation.
48
Installation Manual
Advertisement
Table of Contents
Troubleshooting
