Default Value
Web User Interface Reference
SIP_ADD_RPORT_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
SIP_REQURI_PORT_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
SIP_SUBS_EXPIRE_n
Parameter Name Example
Value Format
Description
Document Version 2011-11
0
Keep Alive Interval (Page 80)
SIP_ADD_RPORT_1, SIP_ADD_RPORT_2, ..., SIP_ADD_RPORT_6
Boolean
Selects whether to add the 'rport' parameter to the top Via header field
value of requests generated. For details, refer to RFC 3581.
•
Y (Add Rport [RFC 3581])
•
N (Do not add Rport [RFC 3581])
N
Supports Rport (RFC 3581) (Page 81)
SIP_REQURI_PORT_1, SIP_REQURI_PORT_2, ...,
SIP_REQURI_PORT_6
Boolean
Specifies whether to add the port parameter to the Request-Line in the
initial SIP request.
•
Y (Add the port parameter)
•
N (Do not add the port parameter)
Note
•
Request URI in REGISTER example:
–
If set to "Y", the port parameter is added to the
Request-Line, as follows:
Request-Line: REGISTER sip:192.168.0.10:5060 SIP/2.0
–
If set to "N", the port parameter is not added to the
Request-Line, as follows:
Request-Line: REGISTER sip:192.168.0.10 SIP/2.0
Y
SIP_SUBS_EXPIRE_1, SIP_SUBS_EXPIRE_2, ...,
SIP_SUBS_EXPIRE_6
Integer
Specifies the length of time, in seconds, that the subscription remains
valid. This value is set in the "Expires" header of the SUBSCRIBE
request.
Section 5 Configuration File Programming
Administrator Guide
179