Section 4 Web User Interface Programming
Value Range
Default Value
4.7.2 Call Control [Line 1]–[Line 6]
This screen allows you to configure various call features that are specific to each line.
4.7.2.1 Call Control
Display Name
Description
Value Range
Default Value
Configuration File Reference
92
Administrator Guide
Max. 32 characters
Note
•
If the phone number contains characters other than 0–9, *, #,
and +, the number may not be rejected correctly.
Not stored.
Specifies the name to display as the caller on the other party's phone
when you make a call.
Max. 24 characters
Note
•
You can use Unicode characters for this setting.
Not stored.
DISPLAY_NAME_n (Page 163)
Document Version 2011-11