Rtsp Test - Crestron TSW-560 Supplemental Manual

Use the Rava Diagnostics screen to test using the Rava ® SIP Intercom with the touch
screen. This screen can be used to call another touch screen that has Rava, to test and
configure projects, and to adjust various Rava settings.
To place a call, dial the extension of the desired touch screen using the on-screen numeric
keypad, and then tap Call. If the intercom works but the project does not, there is an issue
with the project; if the intercom does not work, there is an issue with the settings.
Tap < BACK to return to the Diagnostics screen.

RTSP Test

On the Diagnostics screen, tap RTSP Test to display the RTSP Stream Diagnostics
screen.
RTSP Stream Diagnostics Screen
Use the RTSP Stream Diagnostics screen to test whether Real Time Streaming Protocol
(RTSP) is functioning on the touch screen.
Tap the text field below H264 Stream Source URL: (Touch to edit) to open the on-screen
keyboard (not shown). Enter the URL for an H.264 video stream source, and then tap
SAVE. The video stream is displayed in the lower right portion of the RTSP Stream
Diagnostics screen.
Tap the up and down arrows on the left side of the screen to raise or lower the volume of
the video stream, from 0 to 100%, and tap On or Off under Mute to mute or unmute the
volume of the video stream.
Tap < BACK to return to the Diagnostics screen.
16 • TSW-560/TSW-760/TSW-1060: 5", 7", and 10.1" Touch Screens
Supplemental Guide – DOC. 7927A