Panasonic UF-6300 Service Manual page 44

2.2.15. Fuser Lamp (732), Exit Roller (719), Fuser Roller (709), Pressure Roller (706)
(2)
Black
(8)
(9)
(4)
(3)
(6)
(7)
White
(5)
(1) Remove the Rear Cover (Refer to 2.2.12.), and the
Fuser Unit (Refer to 2.2.14.).
(2) Remove 1 Screw (4N).
(3) Remove the PSU-Fuser Harness (1028), and Fuser
Lamp Terminal B (731).
(4) Remove the Fuser Lamp (732).
Caution:
When reinstalling the Fuser Lamp, make sure that the
Fuser Lamp is inserted into the Fuser Unit as
illustrated. Do not touch the glass portion of the Fuser
Lamp with bare hands. Grease from fingerprints will
shorten its life cycle, use isopropyl alcohol to clean
fingerprints.
Caution:
When reinstalling the Fuser Lamp, make sure that
both ends of the Fuser Lamp fits into the projected
area of the Fuser Lamp Terminal A (724), and the
Fuser Lamp Terminal B (731).
(5) Remove the E22 Gear (722).
Caution:
You may need to use force to pull out the Gear.
(6) Remove the Right, and Left P3.5L11.2 Bushings
(720, and 721).
(7) Remove the Exit Roller (719).
(8) Remove 2 Screws (4N).
(9) Remove the Fuser Cover (723).
44