Panasonic UF-6300 Service Manual page 272

Unit information of the Firmware Update Mode:
For USB Connected Unit (DP-2310/3010 only):
Every time the machine finishes receiving a firmware code file the unit deletes and rewrites
the firmware code and will return to Service Mode again. Set the unit back to USB
Firmware Update after the machine returns to Service Mode and continue the firmware
update.
When the last firmware code file (PNL) is received, the unit will re-boot automatically and return
to standby. The unit doesn't re-boot automatically when you select an independent file and the
PNL firmware wasn't transferred. Cycle the power Off-On and reset the unit if the firmware code
file transfer is finished and the unit has returned to the Service Mode.
For USB Connected Unit (Other models):
Every time the machine finishes receiving a firmware code file, the unit deletes and rewrites
the firmware code and will return to USB Firmware Update and continue the firmware
update automatically.
When the last firmware code file (AutoBoot) is received the unit will re-boot automatically and
return to standby. The unit doesn't boot automatically when you select an independent file. (The
display returns to "Update in Progress") Cycle the power Off-On to reset the unit if the firmware
code file transfer is finished and the display shows Completed.
For Parallel Connected Unit:
Every time the machine finishes receiving a firmware code file the unit deletes, rewrites the
firmware code and then re-boots. Set the unit back to Parallel Firmware Update in Service Mode
after boot up to continue the firmware update.
When the transfers of all the firmware files are
8
finished, click [Finish] to close the tool.
Note: For USB Connected Unit only.
When the unit returns to standby, Plug
and Play of the printer will popup.
Click [Cancel] to close the Printer Plug
and Play window.
A Firmware Deletion confirmation screen will
9
appear.
Click [Yes] to delete the firmware code files
that you used for the update, or click [No] to
keep the firmware code files in your PC for
future use.
Local Firmware Update Tool (Parallel/USB Port)
Page 13