Panasonic UF-6300 Service Manual page 43

2.2.14. Fuser Unit, Thermistor Assembly (728)
(3)
(4)
(7)
(6)
(5)
(9)
(11)
(10)
(2)
(8)
(1) Remove the Rear Cover (Refer to 2.2.12.).
(2) Remove 1 Screw (19).
(3) Remove the Fuser Top Cover (733).
(4) Disconnect the Connectors CN85, and CN87 on the
SNS4 PC Board (1007).
(5) Disconnect the Connector CN102 on the Power
Supply Unit (423).
(6) Remove 1 Screw (4N).
(7) Remove the FG1 Harness (629).
(8) Remove 4 Screws (19).
(9) Remove the Fuser Unit.
(10) Remove 1 Screw (1Q).
(11) Remove the Thermistor Assembly (728).
43