Panasonic UF-6300 Service Manual page 177

Paper Feed Solenoid (531)
No Paper Actuator (525)
2nd Cassette (Option)
Paper Feed Units No.1 and 2
The Paper Feeder Unit No. 2 is available as an option.
Paper Feed Unit No.1 Operation
1. The printing operation begins when the nPRNT (Print Request) output signal level goes Low. The
Printer Motor (626) is initialized.
2. The Paper Feed Solenoid (531) is energized for a specified period of time and turned ON.
This activates the Paper Feed Roller (518), which rotates one revolution. The paper is separated into
individual sheets by the L and R Paper Separation Clips (809 and 811) and transported to the Feed
Roller (526).
3. After one revolution the Paper Feed Roller (518) stops, releasing the paper. The Feed Roller (526)
transports the paper to the drum area.
4. The actual printing process starts at a specified time after the Timing Actuator (609) is activated and
stops at a a specified period of time after the trailing edge clears the Timing Actuator (609).
Paper Feed Unit No. 2 (Optional) Operation
The Paper Feed Unit No.1 always takes priority. The Paper Feed Unit No. 2 becomes operational only
when the cassette No.1 runs out of paper and the NP Sensor is deactivated, causing the nPCHK1 output
signal level to go High.
1. The printing operation begins when the nPRNT (Print Request) output signal level goes Low. The
Printer Motor (626) is initialized.
2. The Paper Feed Solenoid (908) is energized for a specified period of time and is turned ON. This
activates the Paper Feed Roller (911), which rotates one revolution.
The paper is separated into individual sheets by the L and R Paper Separation Clips (809) (811) and
transported to the Feed Roller 2 (904).
3. After one revolution the Paper Feed Roller (911) stops, releasing the paper. The Feed Roller 2 (904)
and the Feed Roller (526) transports the paper to the drum area.
4. The actual printing process starts at a specified time after the Timing Actuator (609) is activated and
stops at a specified period of time after the trailing edge clears the Timing Actuator (609).
Feed Roller (526)
Toner Cartridge
Paper Feed Roller (518)
Laser Unit (512)
No Paper Actuator (922)
Fuser Unit (701)
OPC Drum
Paper Feed Roller (911)
Paper Feed Solenoid (908)
177
Paper Direction
Paper Exit Actuator (730)
Bias Transfer Roller (604)
Timing Actuator (609)
Printer Motor (626)
Feed Roller 2 (904)