Panasonic UF-6300 Service Manual page 36

(10)
(11)
2.2.7. Transmit Motor (324)
(3)
(5)
(10) Remove 2 P6A Bushings (316).
(11) Remove the Eject Roller (303).
(1) Remove the Transmit Guide (301) Assembly
(Refer to 2.2.4.).
(2) Remove the Stamp Assembly (325, and 326)
(Refer to 2.2.5.).
(3) Disconnect the Connector (1020) from the Transmit
Motor (324).
(4) Remove the ADF Gear (305), and ADF Angular
(4)
Shaft (338).
Caution:
When removing the ADF Gear, rotate the Transmit
Motor Gear by hand until the Gear Latch Hook can be
seen from the inside, under the Transmit Motor. Push
down on the Latch Hook to release the ADF Gear.
(5) Remove 2 Screws (19).
(6) Remove the Transmit Motor (324).
(6)
Caution:
Reinstall the Transmit Motor (324) as illustrated.
Caution:
Before reassembling, apply EM-50L Grease to the
Gear Posts as illustrated.
36