Fq2 Communications For Ethernet/Ip Connections - Omron FQ2-S/CH Series User Manual

FQ2 Communications for EtherNet/IP Connections

You can use EtherNet/IP tag data links to communicate between the PLC and the Sensor to perform control via
command/response communications or to output data after measurements.
The FQ2 complies with EtherNet/IP conformance test version A10.
To connect to OMRON Controllers and communicate through EtherNet/IP, you use the Network Configurator to
set up tag data links (i.e., tags, tag sets, and connection settings).
Refer to the following manuals for details on the tag data link settings that are made with the Network
Configurator.
• NJ-series CPU Unit Built-in EtherNet/IP Port User's Manual (Cat. No. W506)
• CS/CJ-series EtherNet/IP Units Operation Manual (Cat. No. W465)
• CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (Cat. No. W495)
90
Controlling Operation and Outputting Data with EtherNet/IP Communications FQ2-S/CH User's Manual
for Communications Settings