System/Network - Kyocera 7002i Operation Manual

Setup and Registration (System Menu) > System Menu

System/Network

Configures machine system settings.
Network
Configures network settings.
Host Name
[System Menu/Counter] key > [System/Network] > [Network] > [Host Name]
Item
Host Name
Wired Network Settings
[System Menu/Counter] key > [System/Network] > [Network] > [Wired Network Settings]
Configure wired network settings.
TCP/IP Setting
Item
TCP/IP
IPv4
IP Address
Subnet Mask
Default Gateway
DHCP
Auto-IP
Check the host name of the machine. Host name can be changed from Command
Center RX.
Changing Device Information (page 2-65)
Select whether to use TCP/IP Protocol.
Value: Off, On
Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/
IP] is set to [On].
Set the IP address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be
entered.
Set the IP subnet mask.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be
entered.
Set the IP gateway address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be
entered.
Select whether to use the DHCP (IPv4) server.
Value: Off, On
Select whether to use Auto-IP.
Value: Off, On
8-47
Description
Description