Kyocera 7002i Operation Manual page 529

Troubleshooting > Troubleshooting
Error
Code
1132 Failed to send the e-mail.
Failed to send via FTP.
2101 Failed to send via SMB.
Failed to send via FTP.
Failed to send the e-mail.
Failed to send i-FAX.
2102 Failed to send via FTP.
2103
Failed to send the e-mail.
Failed to send i-FAX.
2201 Failed to send the e-mail.
2202 Failed to send via FTP.
2203 Failed to send via SMB.
2231 Failed to send i-FAX.
2204 Failed to send the e-mail.
Failed to send i-FAX.
Message
Check the following of the SMTP server.
•
•
Check the following of the FTP server.
•
•
Check the network and SMB settings.
•
•
•
•
•
Check the network and FTP settings.
•
•
•
•
•
Check the network and Command Center RX.
•
•
•
•
•
Check the network.
•
•
•
Check the following of the FTP server.
•
•
Check the network.
•
•
•
Check the network.
•
•
•
Check the e-mail size limit of the SMTP settings
on the Command Center RX.
10-37
Corrective Actions
Is SMTP over SSL available?
Is the encryption available?
Is FTPS available?
Is the encryption available?
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
Host name and IP address
Port number
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
Host name and IP address
Port number
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
POP3 server name of the POP3 user
SMTP server name
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
Is FTP available?
The server is not operating properly.
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
Reference
Page
Refer to the
Command
Center RX
User
Guide.
—
—
—
page 2-66
—
—
—
—
page 2-66