Kyocera 7002i Operation Manual page 519

Troubleshooting > Troubleshooting
Message
Check the paper in the
multipurpose tray.
Check the side feeder.
Confidential
document was
detected.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-66)
E
Message
Empty the punch
waste box.
Error occurred at
cassette #.
F
Message
Failed to specify Job
*1
Accounting.
Failed to store job
retention data.
FAX box limit
exceeded.
Folding tray is full of
paper.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-66)
Checkpoints
—
—
—
Checkpoints
Is the punch waste box full?
―
Checkpoints
—
—
—
Is the acceptable storage
capacity exceeded?
10-27
Corrective Actions
The paper size is different. Set
selected size paper and select
[Continue].
The side feeder is not installed
correctly. Attach the side feeder.
The machine detects the
document guard pattern. Job is
canceled. Select [End].
Corrective Actions
Follow the instructions on the
screen. and empty the punch
waste box.
Open the cassette. Check inside
the machine and remove the
paper.
Corrective Actions
Failed to specify Job Accounting
when processing the job
externally. The job is canceled.
Select [End].
The job is canceled. Select
[End].
Follow the instructions on the
screen and delete documents
from the FAX box to make room
for FAX reception.
To check the canceled job,
select the [Status/Job Cancel]
key and then [Printing Jobs] to
check receipt result.
Remove the paper. Printing then
resumes.
Reference
Page
page 5-5
―
―
Reference
Page
page 10-13
―
Reference
Page
—
—
FAX
Operation
Guide
—