Image Repeat - Kyocera 7002i Operation Manual

Using Various Functions > Functions

Image Repeat

Layout/Edit
Copy
Tiles the 1 copied sheet with an original image. You can also specify the area of the original to repeat.
Zoom Priority
Original
Double Copy
Original
Item
Off
Zoom Priority
Specify
Repeat
Area
Double ―
Copy
*1 The input units can be changed in System Menu.
Measurement (page 8-15)
Repeat an image of specified zoom ratio.
Copy
Copy two image.
Copy
Value
25 to 400% (in 1%
increments)
Off
*1
On: Metric
Start X1: 0 to 431 mm
Y1: 0 to 296 mm
Inch
X1: 0.00 to 16.99"
Y1: 0.00 to 11.68"
On: Metric
Area X2: 1 to 432 mm
Y2: 1 to 297 mm
Inch
X2: 0.01 to 17.00"
Y2: 0.01 to 11.69"
Set the default screen.
Select [+] or [-] to change the displayed magnification as
desired. Select [# Keys] to use the numeric keys for entry.
To set the area of the original to be repeated, select [On] for
"Specify Repeat Area".
Select [+] or [-] to input the area of the original to be repeated.
Select [# Keys] to use the numeric keys for entry.
Y1: Length from top left of
platen to top edge of repeat
area
X1: Length from top left of
platen to left edge of repeat
area
Y2: Height of repeat area
X2: Width of repeat area
Makes 2 copies of the same original on a single sheet.
For example, you can double-copy an A5 original onto an A4
sheet which you then cut in half to make 2 copies that are
identical to the original.
6-56
Description