Using The Embedded Web Server - HP storageworks 2/32 Installation Manual

Using the Embedded Web
Server
If an HAFM server is not available, you can use the Embedded Web Server (EWS)
interface to configure the Edge Switch 2/32. Selectively perform the following
configuration tasks according to the customer's installation requirements:
■
■
■
■
■
■
■
Note:
interface. For additional information on configuring more advanced features using
EWS, see the online EWS help or the
Guide.
Edge Switch 2/32 Installation Guide
Configure Switch Ports
Configure Switch Identification
Configure Date and Time
Configure Switch and Fabric Parameters
Configure Network Information
Configure SNMP Trap Message Recipients
Configure User Rights
This chapter describes the initial set up of the Edge Switch 2/32 using the EWS
on page 89
on page 91
on page 92
on page 93
on page 97
on page 101
HP StorageWorks Embedded Web Server User
3
on page 100
87