Using Hafm From A Remote Location; Remote Workstation Minimum Requirements - HP storageworks 2/32 Installation Manual

Using HAFM from a Remote Location

Use this section to install the HAFM client on a remote workstation.

Remote Workstation Minimum Requirements

The following minimum requirements must be met in order to install HAFM on a
remote workstation.
Note:
both the client and server machines.
■
■
■
■
■
■
Edge Switch 2/32 Installation Guide
In order for HAFM to function properly, compatible versions must be installed on
®
Windows, UNIX or Workstation with color monitor, keyboard, and mouse
using:
®
— Intel Pentium processor with a 200 MHz or greater clock speed, and the
Microsoft Windows 95, Windows 98, Windows ME, Windows 2000,
®
Windows NT 4.0, Windows XP, UNIX, or Linux 2.2 operating system.
— HP HA PA-RISC processor with a 360 MHz or greater clock speed, using
the HP-UX 11 or higher operating system.
— Sun Microsystems UltraPARC-II processor with a 300 MHz or greater
clock speed, using the SunOS Version 5.5.1 or higher operating system, or
Solaris Version 2.5.1 or higher operating system.
— IBM PowerPC microprocessor with a 233 MHz or greater clock speed, or
POWER3 microprocessor with a 333 MHz or greater clock speed, using
the AIX Version 4.3.3 or higher operating system.
At least 15 MB available on the internal hard drive.
32 MB or greater RAM.
Video card supporting 256 colors at 800 x 600 pixel resolution.
Ethernet network adapter.
Java-enabled Internet browser, such as Microsoft Internet Explorer (Version
4.0 or later) or Netscape Navigator (Version 4.0 or later).
Installing and Configuring the Edge Switch 2/32
83