Add A Firmware Version - HP storageworks 2/32 Installation Manual

Add a Firmware Version

The firmware version shipped with the edge switch is provided on the Edge
Switch 2/32 documentation CD. Subsequent firmware versions to upgrade the
edge switch are provided to customers through the Hewlett-Packard website.
Note:
notes that accompany the firmware version. This information supplements information
provided in this general procedure.
Use these steps to add an edge switch firmware version to the library stored on the
HAFM server hard drive:
1. Obtain the new firmware version from the Hewlett-Packard website:
Note:
2. At the HAFM server, open the HAFM application. The Products View page
3. Double-click the icon representing the edge switch to which the firmware
Edge Switch 2/32 Installation Guide
When adding a firmware version, follow procedural information in the release
The following path is subject to change.
a. At the HAFM server or other personal computer (PC) with Internet
access, open the Hewlett-Packard website. The uniform resource locator
(URL) is http://www.hp.com/country/us/eng/support.html.
b. Click on Firmware Downloads in left panel.
c. Click the Switch Firmware Version XX.YY.ZZ entry, where XX.YY.ZZ
is the desired version. The Windows Save As dialog box displays.
Verify or correct the directory path specified in the Save in field and the
file name specified in the File name field.
d. Click Save. The new firmware version is downloaded and saved to the
HAFM server or PC hard drive.
e. If the new firmware version was downloaded to a PC (not the HAFM
server), transfer the firmware version file to the HAFM server by backup
disk, CD-ROM, or other electronic means.
displays.
version will be added. The Hardware View page for the selected edge switch
displays.
Manage Firmware Versions
105