HAFM Server
To run HAFM software, you must set up and configure the HAFM server. Refer to
the appropriate HAFM Server Installation Guide for instructions on:
■
■
■
■
■
Record or Verify HAFM Server Restore Information
Configuration information must be recorded to restore the HAFM server in case
of hard drive failure. The Windows 2000 operating system and the HAFM and
Edge Switch 2/32 Product Manager application must also be restored. Refer to
the HP StorageWorks Edge Switch 2/32 Service Manual for instructions.
To record or verify HAFM server configuration information, refer to the
appropriate HAFM Server Installation Guide for instructions.
Edge Switch 2/32 Installation Guide
Setting up the HAFM server.
Connecting the HAFM server to the LAN.
Configuring the network addressing for the HAFM server.
Setting HAFM server date and time.
Creating HAFM user names and passwords.
Installing and Configuring the Edge Switch 2/32
45