Table of Contents
Advertisement
Procedures
Use the following procedures to create a new threshold alert, or to modify, activate,
deactivate, or delete an alert.
Create New Alert
1. At the Hardware View for the selected switch, choose Configure > Threshold
Alerts. The Configure Threshold Alerts dialog box displays, as shown in
Figure
2–29.
If alerts are configured, they will display in table format showing the name of the
alert, type of alert (Rx, TX, or Rx or Tx), and alert state (inactive or active).
Figure 2–29: Configure Threshold Alerts dialog box
edge switch 2/32 installation guide
Installing and Configuring the Edge Switch 2/32
2-43
Advertisement
Table of Contents
