Configuring Accounting Methods For An Isp Domain - HP MSR Series Configuration Manual

Step
5. Specify the command
authorization method.
6. Specify the authorization
method for IPoE users.
7. Specify the authorization
method for LAN users.
8. Specify the authorization
method for login users.
9. Specify the authorization
method for portal users.
10. Specify the authorization
method for PPP users.
11. Specify the authorization
method for SSL VPN
users.

Configuring accounting methods for an ISP domain

Configuration prerequisites
Before configuring accounting methods, complete the following tasks:
1. Determine the access type or service type to be configured. With AAA, you can configure an
accounting method for each access type and service type.
2. Determine whether to configure the default accounting method for all access types or service
types. The default accounting method applies to all access users. However, the method has a
lower priority than the accounting method that is specified for an access type or service type.
Command
authorization command
{ hwtacacs-scheme
hwtacacs-scheme-name [ local [ none ] |
local [ none ] | none }
authorization ipoe { local [ none ] | none
| radius-scheme radius-scheme-name
[ local ] [ none ] }
authorization lan-access { local [ none ]
| none | radius-scheme
radius-scheme-name [ local ] [ none ] }
authorization login { hwtacacs-scheme
hwtacacs-scheme-name
[ radius-scheme radius-scheme-name ]
[ local ] [ none ] | local [ none ] | none |
radius-scheme radius-scheme-name
[ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ]
[ none ] }
authorization portal { local [ none ] |
none | radius-scheme
radius-scheme-name [ local ] [ none ] }
authorization ppp { hwtacacs-scheme
hwtacacs-scheme-name
[ radius-scheme radius-scheme-name ]
[ local ] [ none ] | local [ none ] | none |
radius-scheme radius-scheme-name
[ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ]
[ none ] }
authorization sslvpn { ldap-scheme
ldap-scheme-name [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ local ] [ none ] }
52
Remarks
By default, the default
authorization method is used
for command authorization.
The none keyword is not
supported in FIPS mode.
By default, the default
authorization method is used
for IPoE users.
The none keyword is not
supported in FIPS mode.
By default, the default
authorization method is used
for LAN users.
The none keyword is not
supported in FIPS mode.
By default, the default
authorization method is used
for login users.
The none keyword is not
supported in FIPS mode.
By default, the default
authorization method is used
for portal users.
The none keyword is not
supported in FIPS mode.
By default, the default
authorization method is used
for PPP users.
The none keyword is not
supported in FIPS mode.
By default, the default
authorization method is used
for SSL VPN users.
The none keyword is not
supported in FIPS mode.