Figure 117 Specifying the host name (or IP address)
c. Click Open to connect to the server.
If the connection is successfully established, the system notifies you to enter the username and
password. After entering the username (client001) and password (aabbcc), you can enter the
CLI of the server.
Publickey authentication enabled Stelnet server
configuration example
Network requirements
As shown in
and the RSA public key algorithm.
Establish a connection between the host and the router, so you can log in to the router to manage
configurations.
Figure 118 Network diagram
Figure
118, the router acts as the Stelnet server, and it uses publickey authentication
411