HP MSR Series Configuration Manual page 204

Figure 74 Adding an IP address group
3. Add a portal device:
a. Select User Access Policy > Portal Service > Device from the navigation tree to enter the
portal device configuration page.
b. Click Add to enter the page shown in
c. Enter the device name.
d. Enter the IP address of the router's interface that exchanges information with the portal
server.
e. Set whether to support the portal server heartbeat and user heartbeat functions.
In this example, select No for both Support Server Heartbeat and Support User
Heartbeat.
f. Enter the key, which must be the same as that configured on the router.
g. Select Directly Connected from the Access Method list.
h. Click OK.
Figure 75 Adding a portal device
Figure 75.
189