HP MSR Series Configuration Manual page 563
Hpe flexnetwork msr router series
Hide thumbs
Also See for MSR Series:
- Configuration manual (889 pages) ,
- Command reference manual (684 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
# Specify the IP address of GigabitEthernet 2/0/1.
[RouterB] interface gigabitethernet 2/0/1
[RouterB-GigabitEthernet2/0/1] ip address 1.1.1.2 255.255.255.0
# Configure strict uRPF check on GigabitEthernet 2/0/1.
[RouterB-GigabitEthernet2/0/1] ip urpf strict acl 2010
2.
Configure Router A:
# Specify the IP address of GigabitEthernet 2/0/1.
<RouterA> system-view
[RouterA] interface gigabitethernet 2/0/1
[RouterA-GigabitEthernet2/0/1] ip address 1.1.1.1 255.255.255.0
# Configure strict uRPF check on GigabitEthernet 2/0/1 and allow use of the default route for
uRPF check.
[RouterA-GigabitEthernet2/0/1] ip urpf strict allow-default-route
548
- Quick Links:
- Configuring Local Users
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
