Configuring Portal User Synchronization - HP MSR Series Configuration Manual

Step
1. Enter system view.
2. Enter portal Web
server view.
3. Configure portal
Web server
detection.

Configuring portal user synchronization

Once the access device loses communication with a portal authentication server, the portal user
information on the access device and that on the portal authentication server might be inconsistent
after the communication resumes. To address this problem, the device provides the portal user
synchronization feature. This feature is implemented by sending and detecting portal
synchronization packets, as follows:
1. The portal authentication server sends the online user information to the access device in a
synchronization packet at the user heartbeat interval, which is set on the portal authentication
server.
2. Upon receiving the synchronization packet, the access device compares the users carried in
the packet with its own user list. If a user contained in the packet does not exist on the access
device, the access device informs the portal authentication server to delete the user. The
access device starts the synchronization detection timer (timeout timeout) immediately when a
user logs in. If the user does not appear in any synchronization packet within a synchronization
detection interval, the access device considers the user does not exist on the portal
authentication server and logs the user out.
Portal user synchronization requires a portal authentication server to support the portal user
heartbeat function. Only the IMC portal authentication server supports the portal user heartbeat
function. To implement the portal user synchronization feature, you also need to configure the user
heartbeat function on the portal authentication server. Make sure the user heartbeat interval
configured on the portal authentication server is not greater than the synchronization detection
timeout configured on the access device.
Deleting a portal authentication server on the access device also deletes the user synchronization
configuration for the portal authentication server.
To configure portal user information synchronization:
Step
1. Enter system view.
2. Enter portal
authentication
server view.
3. Configure portal
user
synchronization.
Command
system-view
portal web-server server-name
server-detect [ interval interval ] [ retry
retries ] { log | trap } *
Command
system-view
portal server server-name
user-sync timeout timeout
152
Remarks
N/A
N/A
By default, portal Web server
detection is disabled.
This feature takes effect regardless
of whether portal authentication is
enabled on an interface or not.
Remarks
N/A
N/A
By default, portal user
synchronization is disabled.