HP MSR Series Configuration Manual page 235

OUI value list
GigabitEthernet2/0/1 is link-up
Port mode
NeedToKnow mode
Intrusion protection mode
Security MAC address attribute
Learning mode
Aging type
Max secure MAC addresses
Current secure MAC addresses
Authorization
# After users pass authentication, display MAC authentication information. Verify that port
GigabitEthernet 2/0/1 allows multiple MAC authentication users to be authenticated.
[Device] display mac-authentication interface gigabitethernet 2/0/1
Global MAC authentication parameters:
MAC authentication
User name format
Username
Password
Offline detect period
Quiet period
Server timeout
Authentication domain
Max MAC-auth users
Online MAC-auth users
Silent MAC users:
MAC address
GigabitEthernet2/0/1 is link-up
MAC authentication
Authentication domain
Auth-delay timer
Re-auth server-unreachable : Logoff
Host mode
Max online users
Authentication attempts
Current online users
MAC address
1234-0300-0011
1234-0300-0012
1234-0300-0013
# Display 802.1X authentication information. Verify that GigabitEthernet 2/0/1 allows only one
802.1X user to be authenticated.
[Device] display dot1x interface gigabitethernet 2/0/1
Global 802.1X parameters:
802.1X authentication
: macAddressElseUserLoginSecure
: NeedToKnowOnly
: NoAction
: Sticky
: Periodical
: 64
: 0
: Permitted
: Enabled
: MAC address in uppercase(XX-XX-XX-XX-XX-XX)
: mac
: Not configured
: 300 s
: 180 s
: 100 s
: sun
: 1024 per slot
: 3
VLAN ID From port
: Enabled
: Not configured
: Disabled
: Single VLAN
: 4096
: successful 3, failed 7
: 3
Auth state
Authenticated
Authenticated
Authenticated
: Enabled
220
Port index