Table of Contents
Advertisement
Chapter 13 Troubleshooting
You will lose all of your changes when you push the Reset button.
To reset the WiMAX Device,
Make sure the POWER LED light on the IDU is on and not blinking.
1
At the bottom of the ODU, open the water-proof cap of the first hole from the left,
2
if the WiMAX Device is facing up.
Press and hold the Reset button for five to ten seconds. Release the Reset button
3
when the POWER LED begins to blink. The default settings have been restored.
If the WiMAX Device restarts automatically, wait for the WiMAX Device to finish
restarting, and log in to the web configurator. The password is "1234".
If the WiMAX Device does not restart automatically, disconnect and reconnect the
WiMAX Device's power. Then, follow the directions above again.
13.4.1 Pop-up Windows, JavaScript and Java Permissions
Please see
190
Appendix C on page
227.
MAX318M2W User's Guide
Advertisement
Table of Contents
