Meaning Of Led Behavior And Lights - Kodak verite 55 plus Extended User Manual

Meaning of LED behavior and lights

•
LED lighting patterns
Blinking 1
Lights up for 1 sec.
Blinking 2 Lights up very rapidly
Blinking 3
Blinking very rapidly 2 times
Blinking 4 Blinking very slowly
LED(s) Behavior
All LEDs No light
Lights up
All LEDs and
Blinking 9
Lights up
Blinking 5
Blinking 1
Blinking 1
English
No light for 1 sec.
No light for more than 1 sec.
No light for 1 sec.
Unit is turned Off
or in sleep mode, a mode which is effective in saving power.
Even in sleep mode, the unit is able to receive a print job from USB / network equipment.
Unit is Starting.
When you turn On, KODAK Logo with "Starting Up" and the progress bar (
the Menu display.
Indicates that the unit is Ready.
The unit is able to receive a print job.
This LED behavior is also used when copying, scanning or canceling copy or scan.
Indicates that the unit is Running.
This LED behavior is used when printing, canceling a print job and after the print jobs are received, running the
alignment process (While running the alignment process, any new print job received will start printing after the
alignment process is done. (The print job is not effected while the unit is scanning the alignment pattern.)).
This LED behavior is used when updating firmware, restoring factory default, performing weekly maintenance.
System error occurred.
Refer to page 59.
Wireless LED
ECO LED
Power LED
Blinking 5 Blinking slowly
Blinking 6 Blinking rapidly
Blinking 7 Blinking very rapidly
Blinking 8 Blinking very rapidly 4 times
Blinking 9 Blinking slowly (in Power-on mode)
Unit status
Meaning / Possible cause(s)
9
— indicated by
— indicated by
— indicated by
No light for 2 sec.
) will be displayed on
Continued on next page.