Understanding The Operator Panel Lights; Using Setup Mode To Review Printer Settings - Kodak 605 User Manual

Operating the Printer

Understanding the Operator Panel Lights

Light Color
Power Orange
Ready Green
Error Red

Using Setup Mode to Review Printer Settings

4-2
Printer Status
The printer power is on.
The printer is ready to make prints.
An error has occurred. See the message on the operator panel, then
"Resolving Operator Panel Error Messages" on page 6-2.
Use the operator panel to review printer settings in Setup mode.
Press Menu to enter Setup Mode.
1.
Press Menu repeatedly to scroll through the printer settings.
2.
Press +/- to scroll through selections.
3.
Press Enter to initiate an action or accept a change.
4.
Press Clear to exit Setup Mode.
5.
Printer settings
are displayed here
3
4
see
1,2
5
April 9, 2007