Kodak verite 55 plus Extended User Manual page 5

•
Federal communications commission notice
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference
that may cause undesired operation.
This equipment may generate or use radio frequency energy.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an AC outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
•
Declaration of conformity
Trade Name: KODAK
Responsible party: FUNAI CORPORATION, Inc.
Product Name: VERITE 55 PLUS/37 (US),
VERITE 55 PLUS/07 (Canada)
Regulatory Model : JM502-10UA
(VERITE 55 PLUS/37, VERITE 55 PLUS/07)
Address: 19900 Van Ness Avenue, Torrance, CA
90501 U.S.A.
Telephone Number: 1-844-995-6325 (1-844-99KODAK)
For regulatory purpose, this product is assigned a regulatory model name.
The regulatory model name should not be confused with the
product name or product model.
•
Canadian notice
CAN ICES-3(B)/NMB-3(B)
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device
must accept any interference, including interference that may cause
undesired operation of the device.
CAN ICES-3(B)/NMB-3(B)
•
PC connection
Use only a custom high speed certified USB cable to connect the
device to your PC. The recommendable cable length is no longer than
5 feet (1.5 m).
English
•
Trademark information
All other registered and unregistered trademarks are the property of
their respective owners.
ENERGY STAR® is a joint program of the U.S.
Environmental Protection Agency and the U.S.
Department of Energy helping us all save money and
protect the environment through energy efficient
products and practices.
The Wi-Fi CERTIFIED Logo is a certification mark of
the Wi-Fi Alliance.
The Wi-Fi Protected Setup Identifier Mark is a mark
of Wi-Fi Alliance.
Google Cloud Print™ is a trademark of Google Inc.
AirPrint™ and the AirPrint logo™ are trademarks of
Apple Inc.
• Windows®, Windows® Server, Windows® Vista, Microsoft Edge,
Internet Explorer® and the Windows logo are trademarks of the
Microsoft group of companies in the United States and/or other
countries.
• Google™, Google Chrome™, Chrome OS™, Google Drive™, Gmail™
and Android™ are trademarks of Google Inc.
• Mac OS®, OS X®, iPhone®, iPod touch®, iPad®, Safari® and Mac
logo® are trademarks of Apple Inc., registered in the U.S. and other
countries.
• iOS is a trademark or registered trademark of Cisco® in the U.S. and
other countries and is used under license by Apple Inc.
• Intel® Core™ is a trademark of Intel Corporation in the U.S. and/or
other countries.
•
Copyright
All other trademarks referenced herein are the property of their
respective owners.
•
Cables
Connections to this device must be made with shielded cables with
metallic RFI / EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
•
Wireless network
The functioning of security systems, medical equipment or sensitive
devices can be disrupted by the transmission power of the device.
Observe any usage regulations (or restrictions) in the vicinity of such
equipment.
The use of this device can affect the operation of insufficiently
shielded medical devices, hearing aids and pacemakers through the
release of high frequency radiation. Also consult a doctor or the
manufacturer of a medical device to establish whether these are
sufficiently shielded from external high frequency radiation.
5 Continued on next page.