Setup Program
3
Setup Program
3.1 Embroidery settings
Adjusting the upper thread tension
Changes to the upper thread tension in the Setup Program affect all of the embroidery motifs. The setting in
the Setup Program is retained after the machine is switched off.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
> Touch the icon «Change upper thread tension».
> To increase the upper thread tension, slide the slider upwards or touch the icon «+».
> To decrease the upper thread tension, slide the slider downwards or touch the icon «-».
Adjusting the maximum embroidering speed
You can use this function to reduce the maximum speed.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
> Touch the icon «Change maximum speed».
RPM
> To decrease the embroidery speed, slide the slider to the left or touch the icon «-».
> To increase the maximum embroidery speed, slide the slider to the right or touch the icon «+».
Setting the embroidery motif position when opening
As the default setting, opened embroidery motifs are always displayed in the center of the hoop. You can
use the switch «Restore saved embroidery motif position» to set that embroidery motifs are opened at the
position in the hoop at which they had been saved in the BERNINA stitch software.
> Tap «Home».
> Touch the icon «Setup Program».
50