National Safety Statements Of Compliance - Nortel 3510-24T Installing Manual

4
BSMI statement for the Ethernet Routing Switch 3510-24T (Taiwan only)
This is a Class A product based on the standard of the Bureau of Standards, Metrology and Inspection (BSMI) CNS
13438, Class A.
MIC notice for the Ethernet Routing Switch 3510-24T (Republic of Korea only)
This device has been approved for use in Business applications only per the Class A requirements of the Republic of
Korea Ministry of Information and Communications (MIC). This device may not be sold for use in a non-business
application.
Observe the Regulatory Marking label on the bottom surface of the chassis for specific certification information
pertaining to this model. Each model in the Ethernet Routing Switch Series which is approved for shipment to/usage in
Korea is labeled as such, with all appropriate text and the appropriate MIC reference number.

National safety statements of compliance

CE marking statement (Europe only)
EN 60 950 statement
This is to certify that the Ethernet Routing Switch 3510-24T is in compliance with the requirements of EN 60 950 in
accordance with the Low Voltage Directive. Additional national differences for all European Union countries have been
evaluated for compliance. This product contains a nickel-metal hydride (NiMH) and/or lithium-ion battery. The NiMH
and lithium-ion batteries are long-life batteries, and it is very possible that you will never need to replace them. However,
should you need to replace them, dispose of the batteries according to instructions.
217326-A