Nortel 3510-24T Installing Manual page 27

7
In the In-Band Subnet Mask field, enter the IP subnet mask address.
Note: If the In-Band Subnet Mask field does not already contain a value when you enter
the IP address in the In-Band IP Address field, the switch software provides an in-use
default value for the In-Band Subnet Mask field. This value is based on the class of the
entered IP address, either In-Band Switch IP address or In-Band Stack IP address.
8
In the Default Gateway field, enter the default gateway address.
9
Press Ctrl-C to return to the Main Menu.
Installing the Ethernet Routing Switch 3510-24T
27