Nortel 3510-24T Installing Manual page 26

26
Enternet Routing Switch 3510-24T
IP Configuration/Setup...
SNMMP Configuration...
System Characteristics...
Switch Configuration...
Console/Comm Port Configuration...
Spanning Tree Configuration...
TELNET/SNMP/Web Access Configuration...
Software Download...
Configuration File...
Display System Log
Reset
Reset to Default Settings
Command Line Interface
Logout
Use arrow keys to highlight option, press <Return> or <Enter> to
select option.
5
Select IP Configuration/Setup to display the IP Configuration/Setup menu.
Note: The default management VLAN in the Ethernet Routing Switch 3510-24T is
VLAN 1. To manage the switch, make sure the network management station is on the
management VLAN or is connected to the management VLAN through routers.
In-Band Switch IP Address: [xx.xx.xx.xxx]
In-Band Subnet Mask:
Default Gateway:
IP Address to Ping:
Start Ping:
Ping Address: xx.xx.xx.xxx
Ping number x, received a response in xx ms.
Use space bar to select choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
6 Enter the IP address of the switch in dotted-decimal notation.
217326-A
Main Menu
IP Configuration/Setup
BootP Request Mode: [ BootP Disabled ]
Configurable
------------------ -----------------
[255.255.255.0] 255.255.255.0
[xx.xx.xx.xxx] xx.xx.xx.xxx
[xx.xx.xx.xxx]
[ No ]
UpTime: 00:00:00
Press Ctrl-C to return to Main Menu.
In Use Last BootP
---------------
0.0.0.0
0.0.0.0
0.0.0.0
Reset Count: x