Adjusting The Wide/Narrow Knobs - Paxar 610 User Manual

14. Close the printhead by pressing down on the thumb well until you hear it click into
place. Close the cover.

Adjusting the Wide/Narrow Knobs

You may need to adjust the two wide/narrow knobs according to the width of your
supply. For supply that is more than two inches, adjust the knobs to the wide setting.
For supply that is two inches or less, adjust the knobs to the narrow setting.
If you experience ribbon smudging in cold, dry environments, adjust the wide/narrow
knobs to the wide setting.
For wide supplies, push down and turn the wide/narrow knobs clockwise with a
screwdriver.
24 Loading Supplies
You must adjust both of the knobs to
the same position.
Users Manual - 610/611/612 Printers