Default Printer Settings; Using The Control Panel; Printer Status Lights - Paxar 610 User Manual

Default Printer Settings

These defaults can be changed using Paxar's PCMate software. Print Speed - 4.0 ips
(inches per second), Ribbon - High Energy, Supply Type - Black Mark, Contrast - 255,
Backfeed - Enabled, Dispense Position - 120 dots, Backfeed Distance - 110 dots.

Using the Control Panel

The control panel helps you check printer status, displays error codes, and allows you to
perform some basic printer functions.

Printer Status Lights

Power:
Supplies:
Paused:
4 Getting Started
The printer shows a steady green light when it is on.
The printer shows a blinking amber light when it is out of
labels or ribbon, or when you have a supply jam.
The printer shows a steady amber light when paused.
The printer shows a blinking amber light when there is a
data, communication, or data formatting error. See the
status code box for the error code. The printer also
shows a blinking amber light when it's ready to print a
label in the On-Demand mode. See Chapter 3, "Printing"
for more information.
Users Manual - 610/611/612 Printers