Paxar 610 User Manual page 20

3. Lift printhead assembly using the printhead tab until the assembly locks into place.
Make sure you use only approved Paxar supplies. See
Appendix A, "Specifications and Accessories" for a list of
Paxar supplies or contact your Paxar Representative for
4. Place the roll of supply on the supply holder. Make sure the supply unrolls from the
top as shown.
5. Adjust the supply holder guides so the sides barely touch the roll. Make sure the
supply roll turns freely.
16 Loading Supplies
CAUTION
more information.
Do not pick up the printer
by the supply holder.
Supply Guides
Users Manual - 610/611/612 Printers