Paxar 610 User Manual page 25

4. Push the deflector tab down.
5. Slide the extra ribbon core on the take-up reel as far as it will go with the writing on
the end of the core facing out. Use your empty ribbon core as the take-up core. The
take-up core only fits on the take-up reel one way. (An extra take-up core is
available. See "Accessories" in Appendix A for more information.)
6. Remove the new ribbon from the package as shown. Do not wrinkle or crush the
new ribbon.
Since some supplies are more abrasive to printheads than
others, using a ribbon wider than your supply helps protect
the printhead. Failure to do this may void your printhead
Users Manual - 610/611/612 Printers
CAUTION
warranty.
Loading Supplies 21