Table of Contents
Advertisement
The NEC VT560 Projector
CAUTION
The NEC VT560 projector is secured upside-down on the projector platform. For optimal performance
in the 2000i, the projector has been changed in two significant ways from the description of how it
works in the NEC VT660K/VT560/VT465 User's Manual:
•
The Zoom lever does not change the size of the projected image. Instead, it functions as a Focus
lever.
•
The blue ring no longer adjusts focus, and you should not move it under any circumstances.
Moving this ring may cause the lenses to separate.
NOTE: For more information on adjusting the projected image, turn to page 13.
Adjust the focus with this lever
Do not move this ring!
4
Do not move the blue ring that surrounds the short-throw, customized projector
lenses, even though the NEC VT660K/VT560/VT465 User's Manual states that you
should use this ring to obtain the best focus. You must disregard this information,
because moving this ring may cause the lenses to separate.
Instead, use the Zoom lever on the projector to adjust image focus. Again, contrary to
the NEC VT660K/VT560/VT465 User's Manual, the Zoom lever will not adjust the
image size on the screen.
Bottom View (Upside-Down)
2000i-DVX Installation Guide
Side View
Advertisement
Table of Contents
