Id Card Settings - Kyocera ECOSYS P6035cdn Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

ID Card Settings

If ID card authentication is enabled, select the authentication type.
NOTE
This functions appears when the Card Authentication kit is activated.
Card Authentication Kit(B) "Card Authentication Kit" (page 11-3)
1
2
Display the screen.
1
[Menu] key > [▲] [▼] key > [User/Job Account] > [OK] key
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name:
Login Password:
2
[▲] [▼] key > [User Login Set.] > [OK] key
Configure the settings.
[▲] [▼] key > [ID Card Settings] > [OK] key
The following settings can be selected.
Item
Key Login
*1
Additional Auth.
*1 This function does not appear when the server type is set to [NTLM] or [Kerberos] in "Network
Authentication".
ECOSYS P6035cdn
3500
3500
When ID card authentication is enabled, select whether or not login by
keyboard is allowed.
Value: Permit, Prohibit
Select whether or not to require password entry after authenticating by ID
card.
Value: Off, Use Password
9-11
ECOSYS P7040cdn
4000
4000
Descriptions