Kyocera ECOSYS P6035cdn Operation Manual page 159

Setup and Registration (System Menu) > System Menu
SSL Setting
Item
SSL
IPP over SSL
HTTPS
*1 The setting will be changed after restarting the device or the network for the machine.
*2 Set "SSL" to [On] in "SSL Setting".
SSL Setting (page 8-23)
IPSec
Item
IPSec
ThinPrint
Item
ThinPrint
*1 The setting will be changed after restarting the device or the network for the machine.
*2 Set "SSL" to [On] in "SSL Setting".
SSL Setting (page 8-23)
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Select the SSL server settings.
Value
Off/On: Off, On
Encryption: AES, DES, 3DES
This setting is displayed when [Off/On] is set to [On].
Select whether or not to use IPP over SSL.
Value: Off, On
NOTE
When selecting [On], the certificates must be installed.
Command Center RX User Guide
Select whether or not to communicate using HTTPS.
Value: Off, On
Make this setting when you use IPSec.
Value: Off, On
Select whether to use ThinPrint.
Value
Off/On: Off, On
ThinPrint over SSL: Off, On
To use Thin Print over SSL, select [Thin Print over SSL] and select
[On].
NOTE
This function is displayed only when the optional ThinPrint Option is activated.
When selecting [On] in "ThinPrint over SSL", the certificates must be installed.
Command Center RX User Guide
8-23
Description
*1 *2
Description
Description
*1 *2