Kyocera ECOSYS P6035cdn Operation Manual page 198

Troubleshooting > Troubleshooting
Symptom
Paper often jams.
2 or more sheets are
overlaps when ejected.
(multi feed)
Printouts are wrinkled.
Printouts are curled.
Cannot print.
Cannot print with USB
memory.
USB memory not
recognized.
Dirt on the top edge or back
of the paper.
Checkpoints
Is the paper loaded correctly?
Is the paper of the supported type? Is it
in good condition?
Is the paper curled, folded or wrinkled?
Are there any loose scraps or jammed
paper in the machine?
―
Is the paper loaded correctly?
Is the paper damp?
Is the paper damp?
Is the machine plugged in?
Is the machine powered on?
Are the USB cable and network cable
connected?
Is the USB host blocked?
―
Is the interior of the machine dirty?
Corrective Actions
Load the paper correctly.
Remove the paper, turn it over, and
reload it.
Replace the paper with new paper.
Remove any jammed paper.
Load the paper correctly.
Load the paper correctly.
Replace the paper with new paper.
Replace the paper with new paper.
Plug the power cord into an AC outlet.
Turn on the power switch.
Connect the correct USB cable and
network cable securely.
Select [Unblock] in the USB host
settings.
Check that the USB memory is securely
plugged into the machine.
Clean the interior of the machine.
10-11
Reference
Page
page 3-2
page 3-4
page 3-4
page 10-25
page 3-2
page 3-2
page 3-2
page 3-2
―
page 2-8
page 2-6
page 8-24
―
page 10-2