Network - Kyocera ECOSYS P6035cdn Operation Manual

Setup and Registration (System Menu) > System Menu

Network

Configures machine system settings.
TCP/IP Settings
[Menu] key > [▲] [▼] key > [Network] > [OK] key > [▲] [▼] key > [TCP/IP Settings] > [OK] key
Configures TCP/IP settings.
Item
TCP/IP
IPv4 Setting
DHCP
Auto-IP
IP Address
Subnet Mask
Default Gateway
Bonjour
IPv6 Setting
TCP/IP(IPv6)
RA (Stateless)
DHCPv6
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Set up TCP/IP to connect to the Windows network.
Value: Off, On
Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/IP] is set to
[On].
Select whether or not to use the DHCP (IPv4) server.
Value: Off, On
Select whether to use Auto-IP.
Value: Off, On
Set the IP addresses.
Value: ###.###.###.###
NOTE
If DHCP is set to [On], this item is displayed only and cannot be entered.
Set the IP subnet masks.
Value: ###.###.###.###
NOTE
If DHCP is set to [On], this item is displayed only and cannot be entered.
Set the IP gateway addresses.
Value: ###.###.###.###
NOTE
If DHCP is set to [On], this item is displayed only and cannot be entered.
Select whether or not to use Bonjour.
Value: Off, On
Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/IP] is [On].
Select whether or not to use IPv6.
Value: Off, On
Select whether to use RA (Stateless).
Value: Off, On
NOTE
This setting is displayed when [TCP/IP (IPv6)] is set to [On].
Select whether to use the DHCP (IPv6) server.
Value: Off, On
NOTE
This setting is displayed when [TCP/IP (IPv6)] is set to [On].
8-18
Description